How to Fit and Use the X-POLE Pole Extension 40mm Chrome
By Pole Factory | Boutique Pole dance : | Published: 2026-10-27
Category: How-to Guides
Learn how to install and use the X-POLE 40mm chrome pole extension. Step-by-step guide covers fit, safety checks, and common mistakes.
Quick Answer
To fit the X-POLE 40mm chrome extension, first confirm your pole is a post-2014 X-POLE model, then attach the extension using the X-JOINT connector (sold separately if not included) following the steps below. Always check stability before use.
Compatibility Check: Why It Matters
The X-POLE 40mm chrome extension is designed for post-2014 X-POLE SPORTS, XPERTS, XPERT Pro, and X-STAGE/X-STAGE Lite models. Using it with an older pole may result in a poor fit or unsafe installation.
Extensions come in various lengths (from 125mm to 500mm) and finishes, so always double-check that you have the correct diameter and size for your pole. The 40mm chrome finish matches chrome poles, but if your pole has a different coating, the extension may not match aesthetically or functionally.
The Role of the X-JOINT
The X-JOINT is the connector piece that secures the extension to the pole. Note that X-JOINTs are not included with the extension. Each X-POLE set typically comes with 3 X-JOINTs, so you may already have one. If not, you'll need to purchase an X-JOINT separately.
Check your existing X-JOINTs for wear and tear before reuse. A damaged connector can compromise stability.
Step-by-Step Installation Guide
- Gather Tools and Check Compatibility: Confirm your pole is a post-2014 X-POLE model (SPORTS, XPERTS, XPERT Pro, or X-STAGE). Ensure the extension diameter (40mm) matches your pole. Have the extension, X-JOINT, and an Allen key (if needed) ready. Using the wrong diameter can cause instability; check before you start.
- Remove the Top Cap or Dome: Unscrew the top cap or dome of your pole carefully. Keep all screws and parts in a safe place. If the cap is stuck, gently tap it with a rubber mallet—do not force it. Stripping screws is a common mistake; use the correct size Allen key.
- Attach the Extension to the Pole: Insert the X-JOINT into the top of the existing pole, then slide the extension onto the X-JOINT. Ensure it sits flush and is fully engaged. Hand-tighten any screws or bolts, then use the Allen key to secure them. If the extension wobbles, it's not fully seated; recheck alignment.
- Reattach the Top Cap and Test Stability: Screw the top cap back onto the extension. Before using the pole, apply gentle pressure to test for any movement. Then, do a slow spin or hold to ensure the extension is secure. If you feel any shifting, stop and re-tighten before use.
Product Facts
- X-POLE - Pole Extension ∅40mm Chrome: This X-POLE 40mm chrome extension is designed for post-2014 X-POLE SPORTS, XPERTS, XPERT Pro, and X-STAGE/X-STAGE Lite models. Ensures you only purchase this extension if you own a compatible pole model, avoiding fit issues.
X-POLE - Pole Extension ∅40mm Chrome - X-POLE - Pole Extension ∅40mm Chrome: X-JOINTs are not included with the extension; some extensions require a separate X-JOINT purchase. You may need to budget for an X-JOINT or check if your pole set already includes one.
