How-to Guides 2026-11-15 Pole Factory | Boutique Pole dance : 0 views
X-POLE 45mm Pole Extension: Fit and Setup Questions Answered
Straight answers to the most common questions about fitting an X-POLE 45mm stainless steel extension, from ceiling height to X-JOINTs and placement.
Compatibility and fit questions
Which X-POLE models does this 45mm extension fit?
It is designed for post-2014 X-POLE SPORTS, XPERTS, XPERT Pro, and X-STAGE models. If your pole is older or a different model, check with the supplier before ordering.
How do I know if I need a 45mm extension?
You need an extension when your ceiling is higher than what your current pole setup can reach. X-POLE extensions come in various diameters, so confirm your pole's diameter is 45mm before choosing this one.
What is the maximum height I can reach with extensions?
X-POLE extensions allow expansion up to 3370mm. For ceilings taller than 3370mm, a custom bar is recommended instead of stacking standard extensions.
How do I measure my ceiling height correctly?
Measure from floor to ceiling at the exact spot where the pole will be installed. Always verify your ceiling height before ordering extensions, as the catalog advises.
Installation and X-JOINT questions
Where do extensions go on the pole?
Extensions are installed only at the top of the pole, in descending order of size, and connected using X-JOINTs. This placement ensures maximum force and stability.
Are X-JOINTs included with the extension?
No, X-JOINTs are not supplied with the extension. Some extensions will require you to purchase an X-JOINT separately. However, each X-POLE set comes with 3 X-JOINTs, so you may not need extra joints—check your specific needs based on the extensions you use.
Can I use two short extensions instead of one long one?
For safety, it is advised to select a size that minimizes the adjuster length and to always use one long extension rather than two short ones. This reduces the number of connection points and potential weak spots.
Do I need a 125mm extension with a 180mm X-JOINT?
Yes, the 125mm extension is used only with 180mm X-JOINTs. Keep this in mind if you are ordering that size.
Key specs for the X-POLE 45mm stainless steel extension
X-POLE - Pole Extension ∅45mm Stainless Steel: Designed for post-2014 X-POLE SPORTS, XPERTS, XPERT Pro, and X-STAGE models. Confirms compatibility with your existing pole before you buy.
X-POLE - Pole Extension ∅45mm Stainless Steel
X-POLE - Pole Extension ∅45mm Stainless Steel: Available in various coatings, diameters, and sizes from 125mm to 500mm. You can match your pole's diameter and choose the length that fits your ceiling.
X-POLE - Pole Extension ∅45mm Stainless Steel: Extensions allow expansion up to 3370mm; for higher ceilings, a custom bar is advised. Helps you decide if standard extensions are enough or if you need a custom solution.
X-POLE - Pole Extension ∅45mm Stainless Steel: X-JOINTs are not included; some extensions require an additional X-JOINT purchase. Plan for extra hardware if your set does not already have enough joints.
Ordering and usage questions
What length extension should I choose?
Choose the longest single extension that fits your height difference, rather than combining multiple shorter ones. This minimizes the adjuster length and improves stability. The catalog recommends always using a long extension over two small ones.
Can I use this extension with a pole that is not 45mm in diameter?
No, this extension is specifically for 45mm poles. Using it with a different diameter pole is not supported and could be unsafe.
Do I need to check anything else before ordering?
Yes, always verify your ceiling height and your pole model's compatibility. If unsure, contact the supplier directly for guidance.