X-POLE 45mm Powder Coated Noir Extension: Fit Guide
By Pole Factory | Boutique Pole dance : | Published: 2026-11-03
Category: Handleidingen
Learn how to fit the X-POLE 45mm powder coated noir extension correctly. Check compatibility, X-JOINT needs, and length before you buy or install.
Quick answer
To fit the X-POLE 45mm powder coated noir extension, first confirm your pole is a post-2014 X-POLE SPORTS, XPERTS, XPERT Pro, or X-STAGE/X-STAGE Lite model. Then check whether you need an extra X-JOINT, choose the right length, and install it following the steps below.
Why the X-JOINT matters more than the extension itself
The extension is only half the story: X-JOINTs are not included with it. Each X-POLE set ships with three X-JOINTs, so you may already have spares, but if you have used them elsewhere or your setup needs more, you must buy them separately. Without the correct X-JOINT, the extension cannot be fitted safely.
Length and coating choices that affect fit
Extensions come in lengths from 125mm to 500mm and in different coatings and diameters. The 45mm diameter must match your existing pole tube; a 40mm extension will not fit a 45mm pole. Powder coated noir is a finish choice, not a compatibility factor, but it should match your pole's coating for a consistent look and grip feel.
Step-by-step fitting instructions
- Confirm your pole model and year: Check the label or manual on your X-POLE to verify it is a post-2014 SPORTS, XPERTS, XPERT Pro, or X-STAGE/X-STAGE Lite. If you are unsure, contact the retailer before ordering. A pre-2014 or non-X-POLE pole will not accept this extension.
- Check your X-JOINT supply: Count the X-JOINTs you have. Each X-POLE set includes three, but if you need more, order them separately with the extension. Missing X-JOINTs will stop installation.
- Measure the extra height needed: Use a tape measure to find the gap between your current pole top and the ceiling. Choose an extension length (125mm to 500mm) that covers this gap without exceeding the pole's adjustment range. Do not guess; an incorrect length may make the pole unstable.
- Match diameter and coating: Select the 45mm diameter to match your existing pole tube. Choose powder coated noir if your pole has the same finish; other coatings are available if not. A different diameter or coating can affect grip and appearance.
- Install the extension with X-JOINTs: Follow the X-POLE instructions for your model: remove the top pole section, insert the X-JOINT, attach the extension, and secure according to the manual. Tighten firmly but do not overtighten. Always re-check the pole's stability after installation.
Product facts
- X-POLE - Pole Extension ∅45mm Powder Coated Noir: Designed for post-2014 X-POLE SPORTS, XPERTS, XPERT Pro, and X-STAGE/X-STAGE Lite models. Check your pole's model and year before ordering; older or other-brand poles may not be compatible.
X-POLE - Pole Extension ∅45mm Powder Coated Noir - X-POLE - Pole Extension ∅45mm Powder Coated Noir: X-JOINTs are not supplied with the extension. You may need to add an X-JOINT to your order if you don't have spares from your original pole set.
- X-POLE - Pole Extension ∅45mm Powder Coated Noir: Available in lengths from 125mm to 500mm and in various coatings and diameters. Measure the height you need to add and confirm your pole's diameter and coating before choosing an option.
