How to Care for Pole Dance Bodysuits with Cut-Outs
By Pole Factory | Boutique Pole dance : | Published: 2026-10-16
Category: Tips & Care
Keep cut-out bodysuits looking sharp with a simple hand-wash routine, smart drying, and storage that protects straps and removable pads.
Quick answer
Hand-wash cut-out bodysuits in cold water with a mild soap, then gently press out water and dry flat away from heat. This protects the thin straps, open-back edges, and removable pads that make cut-out styles so flattering. Skip the washing machine and dryer entirely.
Why cut-out bodysuits need a gentler routine
Cut-out bodysuits concentrate stress on narrow fabric bridges, open-back edges, and strap joins. A standard machine cycle can snag those edges, stretch the cut-outs, and distort the fit. Hand-washing keeps the garment's shape and extends its life, especially if the piece has removable padding or a gathered back.
The fabric blend matters too. Most pole bodysuits use a polyester and elastane mix, which tolerates cold water and mild soap but reacts badly to heat, chlorine, and harsh detergents. Treating the suit like a delicate, not like a gym towel, is the single biggest factor in how long it stays presentable.
What you need before you start
Gather a clean basin or sink, cold water, a gentle hand soap or lingerie wash, a soft towel, and a flat drying rack. Avoid bleach, fabric softener, and enzyme-heavy detergents, which can break down elastane and dull the fabric.
If your bodysuit has removable pads, take them out before washing. Set them aside and clean them separately only if the care label allows it. For pieces like the OKSA WEAR Body Cut-Out, the internal shells are designed to be removed, so this step also prevents them from creasing inside the suit.
How to dry and reshape without stretching
After rinsing, do not wring or twist the bodysuit. Lay it flat on a clean towel, roll the towel gently to absorb excess water, then place the suit on a drying rack in its natural shape. Hanging a wet cut-out bodysuit by its straps can stretch the shoulder area and pull the cut-outs out of alignment.
Keep it out of direct sunlight and away from radiators or hair dryers. Heat weakens elastane and can cause the fabric to lose snap. If the bodysuit has a gathered back, smooth it with your hands while damp so it dries without deep creases.
Storing cut-out bodysuits to prevent snags
Once fully dry, fold the bodysuit loosely and store it flat in a drawer, or hang it on a padded hanger if you have space. Avoid cramming it against Velcro, zippers, or rough fabrics that can catch the cut-out edges.
If you rotate between several pole outfits, keep each one in its own breathable bag or compartment. This is especially useful for pieces with delicate straps, like the SHARKPOLEWEAR Top Mira, whose high neck and open back can snag on neighbouring garments.
Step-by-step cut-out bodysuit care
- Remove pads and pre-treat: Take out any removable shells or pads. If there are deodorant marks or light stains, dab them with a tiny amount of mild soap and cold water before washing. Checkpoint: never rub stains aggressively; blot instead to avoid stretching the cut-out edges.
- Hand-wash in cold water: Fill a basin with cold water and a few drops of gentle soap. Submerge the bodysuit and gently squeeze the suds through the fabric for one to two minutes. Do not scrub or twist. Common mistake: using hot water or regular laundry detergent, which can fade colour and break down elastane.
- Rinse until water runs clear: Drain the basin and refill with clean cold water. Press the bodysuit gently against the bottom of the basin to release soap, repeating until no bubbles remain. Checkpoint: leftover soap residue can attract dirt and irritate skin, so rinse thoroughly.
- Remove excess water without wringing: Lay the bodysuit flat on a clean, dry towel. Roll the towel from one end to the other, pressing lightly so the towel absorbs water. Unroll and lift the bodysuit out. Common mistake: wringing or twisting the suit, which distorts cut-outs and strains straps.
- Dry flat away from heat: Place the bodysuit on a drying rack in its natural shape. If it has a gathered back, smooth it with your hands. Keep it out of direct sun and away from radiators. Checkpoint: hanging by the straps can stretch the shoulder area, so always dry flat.
- Store folded and separate: Once completely dry, fold the bodysuit loosely and store it flat in a drawer or in a breathable bag. Keep it away from Velcro, zippers, and rough fabrics. Next step: if you rotate outfits, label or bag each piece so you can grab it without rummaging.
Product care notes
- OKSA WEAR - Body Cut-Out: The OKSA WEAR Body Cut-Out has removable internal shells and a gathered back, and its care instructions specify hand washing in cold water with mild soap. Removing the shells before washing protects them from creasing, and the gathered back should be smoothed while damp to keep its shape.
- OKSA WEAR - Short Almanara: The OKSA WEAR Short Almanara is made from 73% polyester and 27% elastane and is designed to pair with the Almanara top. The high elastane content means heat and harsh detergents will shorten its life, so cold hand-washing and flat drying are essential.
- SHARKPOLEWEAR - Top Mira: The SHARKPOLEWEAR Top Mira features a high neck, a teardrop cut-out, an open back, and recycled biflex fabric. The high neck and open back create snag points, so store this top separately or in a breathable bag to avoid pulls.
